TB50 which covers Tests for devices supporting multiple versions of the Protocol has just been published by the WITS Technical Committee.
Find it now on the website here: WITS Technical Bulletin #50.2
See the updated Roadmap here: https://www.witsprotocol.org/wits-roadmap/ and the updated Technical Bulletin index here: WITS Technical Bulletin Index Oct 2014
ABB’s AquaMaster 3 Flow Meter was already WITS Self Certified since June this year. Now ABB have gone one step further and, in conjunction with Schneider Electric and Servelec, have achieved full verification.
The defined verification procedure was followed – see “How to achieve self certified and verified status” for further details.
The device now appears in the Verified Field Devices section of the Device Catalogue.
Metasphere have released the WITS DNP3 MM-IM, an approved self-certified mains powered RTU. Featuring an IEC 61131 programming environment, the WITS DNP3 MM-IM acts as a gateway to expandable IO utilising industry standard protocols including Modbus and Ethernet IP; an RTU and PLC in one box.
With support for over 7000 points and storage for approximately 7.5 million DNP3 events the MM-IM can […]
Schneider Electric Telemetry & Remote SCADA Solutions (TRSS) is pleased to announce that SCADA Expert ClearSCADA, our successful SCADA Host software package, now provides support for WITS 1.3, making Schneider Electric the first vendor to support WITS 1.3 within their Master Station. Support for WITS 1.3 is included in both ClearSCADA 2013 R2 and ClearSCADA 2014 R1, providing users the ability to choose between the current User Interface in 2013 R2, and the completely redesigned […]
Company Overview
Kepware Technologies is a private software development company headquartered in Portland, Maine. Kepware provides a portfolio of software solutions to help businesses connect diverse automation devices and software applications. From plant floor to wellsite to windfarm, Kepware serves a wide range of customers in a variety of international vertical markets including Manufacturing, Oil & Gas, Building Automation, Power […]
Triangle MicroWorks provides Software Libraries and PC-based tools to support implementation, test, and maintenance of systems using DNP3.
The Water Industry Telemetry Standards (WITS) protocol is based upon the international standard DNP3 protocol which was developed to allow for flexible […]
Last year we were asked to submit an article about WITS for inclusion in the Water and Sewerage Journal. PSA Chairman Charles Williams wrote the following article:
A new set of Technical Documentation packs has been issued. These are:
Members should apply to […]
BIENNIAL GENERAL MEETING 31/10/2013
Report of the work of the Association over the past 2 years – Ver 3 21/11/2013
Inception
Following the period of development of the Protocol, the Protocol Standards Association was formed on 27th September 2011 at Interim Committee Meeting #8. The first Committee meeting of the new PSA was held on 11th December 2011. The Committee then consisted of:
Vendors:
